Login

15-04-2017, 07:39 PM

Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

gate-keeper · 13-10-2021, 04:47 PM

(15-04-2017, 07:39 PM)hi did you ever get this fixed, as i also have the same issue on a differnt board (BFT Libra ) my pair gates open again right away when they come to close and straight after a "Start" is sent to the board and the gates open? photocells all work as intended any help appreciated Wrote: Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

lcpbarbosa · 30-07-2023, 12:30 PM

(13-10-2021, 04:47 PM)Hi,I having this same problem with faac 245 board. Did you guys found out the solution? Thanks in advancegate-keeper Wrote:
(15-04-2017, 07:39 PM)hi did you ever get this fixed, as i also have the same issue on a differnt board (BFT Libra ) my pair gates open again right away when they come to close and straight after a "Start" is sent to the board and the gates open? photocells all work as intended any help appreciated Wrote: Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Rigel 5 , gates won't open	Nameloc	2	3,743	23-04-2024, 08:35 AM Last Post: JoeF
	Gates tripped	Phil.c	2	186	22-04-2024, 11:27 AM Last Post: benbrooks
	Came ZA3 gates stuck open	Ivorwindybottom	0	363	18-02-2024, 06:29 PM Last Post: Ivorwindybottom
	Electric Gates with AllMatic BIOS2 Unit	antsnaith	3	1,574	31-01-2024, 08:22 AM Last Post: patronsecurity
	Came gates za3p	Webby	4	8,936	07-01-2024, 07:11 PM Last Post: Simon NW
	Nice Gates not closing	StuL	1	1,548	24-08-2023, 01:34 PM Last Post: JoeF
	LIFE AC4 Closing Issues	dilbertdog	0	679	29-07-2023, 02:59 PM Last Post: dilbertdog
	Came gates stuck open.	Ring8180	7	16,988	23-02-2023, 01:08 PM Last Post: SamA
	Robus 600 not closing fully	All Well	11	9,108	03-08-2022, 02:42 PM Last Post: benbrooks
	Proteco Q60 - FH error then close after opening	Needlerp	1	2,376	24-06-2022, 09:54 AM Last Post: JamieF