Thread Rating:
  • 156 Vote(s) - 2.95 Average
  • 1
  • 2
  • 3
  • 4
  • 5
gate bracket setup
#1
hi all ive just started out with gate automation could anyone give me a bit of advice
ive been asked to put some beninca kbob motors on a set of gates they have the hinge thread going into some 150mm box section and the pin it swivels on as part of the box section part of the gate when im working out the distance for the bracket i weld to hold the motor do i class my pin centre as the point from the box section usually i would use a standard pin and adjustable eye setup but i dont want to spend time putting them on if i can do with this current set up.any advice would be appreciated thanks.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Holding the Gate Open mgb 1 3,467 11-07-2023, 01:35 PM
Last Post: JoeF
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,758 03-07-2023, 08:54 AM
Last Post: Michael
  BFT gate and Hikvision wiring help Gowrie 0 3,377 26-05-2023, 02:05 AM
Last Post: Gowrie
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 3,299 25-05-2023, 03:55 PM
Last Post: Kaala1
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,196 15-05-2023, 11:25 AM
Last Post: Nemen3242
  gate stop broke - any spares=liftmaster 300 bomitie 2 4,026 04-05-2023, 04:02 PM
Last Post: bomitie
  Electric gate help PLEASE Be8st 5 6,041 18-10-2022, 09:26 AM
Last Post: SamA
  Bft gate one door stopping Matty c 3 7,610 19-04-2022, 09:13 AM
Last Post: benbrooks
  2014 model BFt rolling gate automation lauriston 1 6,232 07-03-2022, 11:11 AM
Last Post: JamieF
  Sliding gate motor brand advice please! Trevreg98 0 5,581 12-01-2022, 08:40 AM
Last Post: Trevreg98

Forum Jump:


Users browsing this thread: 1 Guest(s)