Thread Rating:
  • 216 Vote(s) - 3.11 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mindy A824 Controller - OK Light Flashing
#1
Hi
I have a Nice Mindy Controller on my gates. The Gates stopped working and the OK light is flashing a series of 7 or 8 short flashes, a pause and then repeats.
I have powered off the whole system to try and reset, but still same light sequence.

I tried to cancel the memory, to do a reset but it doesn't change.
Does anyone know what that light sequence is trying to tell me?

Thanks
Reply
#2
Hi Colin,
In the bottom right hand side of the Mindy controller you should see a row of 6 LED's. The first 3 of which should be lit, and the remaining three should be off. Could you check these and let me know which are on, and which are off?
Cheers,
Dave


(01-04-2016, 10:30 AM)ColinS Wrote: Hi
I have a Nice Mindy Controller on my gates. The Gates stopped working and the OK light is flashing a series of 7 or 8 short flashes, a pause and then repeats.
I have powered off the whole system to try and reset, but still same light sequence.

I tried to cancel the memory, to do a reset but it doesn't change.
Does anyone know what that light sequence is trying to tell me?

Thanks
Kindest Regards,

Dave Blake
Easygates Technical Staff
Reply
#3
(05-04-2016, 10:11 AM)Blakey111 Wrote: Hi Colin,
In the bottom right hand side of the Mindy controller you should see a row of 6 LED's. The first 3 of which should be lit, and the remaining three should be off. Could you check these and let me know which are on, and which are off?
Cheers,
Dave


(01-04-2016, 10:30 AM)ColinS Wrote: Hi
I have a Nice Mindy Controller on my gates. The Gates stopped working and the OK light is flashing a series of 7 or 8  short flashes, a pause and then repeats.
I have powered off the whole system to try and reset, but still same light sequence.

I tried to cancel the memory, to do a reset but it doesn't change.
Does anyone know what that light sequence is trying to tell me?

Thanks
Hi all,
I have the same problem, the 3 led on the lower right are on.
Any fix available.
Paul
Reply
#4
Hi All,

I have the same problem with the OK Led flashing approx. 7-8 times then repeating.

The first 3 LED on the lower right are on.

Any diagnosis or fix ?

Heres hoping.

Paul
Reply
#5
(03-11-2019, 06:04 AM)PaulB Wrote: Hi All,

I have the same problem with the OK Led flashing approx. 7-8 times then repeating.

The first 3 LED on the lower right are on.

Any diagnosis or fix ?

Heres hoping.

Paul

Hi Paul,

it could be one of the following possible faults...

7 Flashes -Electric circuits fault -
Wait at least 30 seconds, then try sending a command and if necessary turn off the power supply. If the condition persists, there may be a malfunction and the electronic board must be replaced.

8 Flashes - A command is already present that disables execution of other commands -
Check the type of command that is always present; for example, it could be a command from a timer on the “open” input.

Hope this helps.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  MINDY A60 remote transmitter programming marxfer 9 12,275 09-05-2018, 06:13 PM
Last Post: Automatic-TC
  Mindy A60 and closing issue alarmeng 2 5,762 09-03-2017, 11:41 AM
Last Post: Sav
  Nice Mindy - One gate doesn't open Danseri 1 5,608 19-01-2016, 11:00 AM
Last Post: Sav
  Daitem SC9200AU Controller to Nice MC824 Shropshire fella 2 7,427 27-10-2014, 03:35 PM
Last Post: Sav

Forum Jump:


Users browsing this thread: 1 Guest(s)