Thread Rating:
  • 201 Vote(s) - 2.86 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CB24 and LYN400 Gates operate with set limits but not with FOB or onboard SBC
#1
Hello,

I have a CB24 with dual LYN400 arms which stopped working. I have reprogram the system several times (even powering off the whole system) but the arms do not move when the remote fob is pressed or the single button. However, they do work when setting the open and close limits.

When the fob is pressed you can hear the relays click but nothing happens.

Any suggestions? I recently had a similar issue and an engineer replaced the backup batteries which seemed to work for a week or so but now it's stopped again.

Many thanks in advanced.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Came ZA3 gates stuck open Ivorwindybottom 0 258 18-02-2024, 06:29 PM
Last Post: Ivorwindybottom
  Electric Gates with AllMatic BIOS2 Unit antsnaith 3 1,196 31-01-2024, 08:22 AM
Last Post: patronsecurity
  Came gates za3p Webby 4 8,818 07-01-2024, 07:11 PM
Last Post: Simon NW
  Nice Gates not closing StuL 1 1,349 24-08-2023, 01:34 PM
Last Post: JoeF
  Gates Opening After Closing tht7 2 9,457 30-07-2023, 12:30 PM
Last Post: lcpbarbosa
  Came gates stuck open. Ring8180 7 16,647 23-02-2023, 01:08 PM
Last Post: SamA
  Aria 400 - gates keep opening and closing objohnuk 1 4,118 13-04-2022, 11:32 AM
Last Post: JoeF
  Gate Controls/Indicators 200m from Gates ADickson 12 56,808 30-12-2021, 11:44 AM
Last Post: herberthaul
  Proteco gates with photocell problem. Shane1 0 2,149 09-10-2021, 07:56 PM
Last Post: Shane1
  Gibidi gates confusing behaviour robguest69 0 4,020 16-09-2021, 11:55 AM
Last Post: robguest69

Forum Jump:


Users browsing this thread: 1 Guest(s)