Thread Rating:
  • 200 Vote(s) - 2.65 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NICE Toona Ram Problem
#1
Good morning folks,

I hope you may be able to help me with a gate problem I have.

I have a pair of driveway gates operated by NICE Toona rams and one gate opens but doesn't stop and reaches its return point and causes both gates to close. When this problem appeared I was going to unlock the gates and leave them open but discovered the gate with the opening problem wouldn't unlock and the "clutch or differential" between the motor worm and drive worm is seized and won't release/decouple.

I'd like to know where I can get a replacement part so as to at least be able to use the unlock facility and open the gate if need be? I guess the second question is, is this likely to be the cause of the gate travel to the end stop problem I have in your experience?

Any help much appreciated.
Reply
#2
(02-08-2015, 09:28 AM)aptid Wrote: Good morning folks,

I hope you may be able to help me with a gate problem I have.

I have a pair of driveway gates operated by NICE Toona rams and one gate opens but doesn't stop and reaches its return point and causes both gates to close. When this problem appeared I was going to unlock the gates and leave them open but discovered the gate with the opening problem wouldn't unlock and the "clutch or differential" between the motor worm and drive worm is seized and won't release/decouple.

I'd like to know where I can get a replacement part so as to at least be able to use the unlock facility and open the gate if need be? I guess the second question is, is this likely to be the cause of the gate travel to the end stop problem I have in your experience?

Any help much appreciated.

Hello

Under the ram itself is the mechanical stop still in place? this may have moved and may need re programming.
Reply
#3
Cheers Sav,

I need to replace the clutch/differential which is on Order from Nice and I will check when I open it up.

Many thanksCool
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Photocell Problem marcoos_1 4 18,899 04-01-2024, 10:23 AM
Last Post: JoeF
  Disable Open hold On NICE NC824 paul@blxnetworks.co.uk 4 1,675 02-10-2023, 09:20 AM
Last Post: benbrooks
  Nice Gates not closing StuL 1 1,351 24-08-2023, 01:34 PM
Last Post: JoeF
  Nice Moonbus Photocells - Faulty? ddaddy 2 1,933 11-07-2023, 01:33 PM
Last Post: JoeF
  Nice HS400 Andruelectricgates 0 904 09-06-2023, 09:28 PM
Last Post: Andruelectricgates
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,211 15-05-2023, 11:25 AM
Last Post: Nemen3242
  Nice Robus RB100 - Control Board Buttons Not Working sl991 5 4,052 02-12-2022, 02:51 PM
Last Post: JoeF
  Nice motor Vandamme911 1 1,793 01-12-2022, 10:31 AM
Last Post: JoeF
  Master to slave remote problem Dingerb 0 1,571 24-12-2021, 01:26 PM
Last Post: Dingerb
  Proteco Leader N1 problem Luc Bevers 0 2,024 22-10-2021, 09:57 AM
Last Post: Luc Bevers

Forum Jump:


Users browsing this thread: 1 Guest(s)