Thread Rating:
  • 196 Vote(s) - 2.84 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Newbie with a headache!
#1
Hi all,
Im dave and i have just received the moovo XW432Pe electric gate openers. safe to say i was extremely excited and impressed by the buid quality etc of this and cant wait to get it fitted.
Thats where im stuck as i have no idea at what angle the bracket should be at. i will post further in the relevent section and all help and advice will be greatly received.
Reply
#2
(09-01-2014, 12:28 PM)Suprabandit Wrote: Hi all,
Im dave and i have just received the moovo XW432Pe electric gate openers. safe to say i was extremely excited and impressed by the buid quality etc of this and cant wait to get it fitted.
Thats where im stuck as i have no idea at what angle the bracket should be at. i will post further in the relevent section and all help and advice will be greatly received.

Hello

its quite straight forward, if you look on the chart for the angle a and b measurement, these measurements should sit at a minimum of 150 x 150mm from the hinge point to the pivot point

please do not hesitate to contact us for further instruction
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Help required please for this newbie... gate-keeper 5 7,111 10-11-2021, 10:46 AM
Last Post: JamieF
  Newbie- rigel4 12v output for keypad Bl-2020 0 4,431 18-01-2020, 12:30 PM
Last Post: Bl-2020
  Glen newbie Glen 0 6,129 25-05-2016, 01:45 PM
Last Post: Glen
  Newbie just back from France Crocodilla Gates 2 13,699 14-01-2016, 11:17 AM
Last Post: Crocodilla Gates
  Newbie in France Roestigraben 1 11,275 27-12-2015, 09:04 PM
Last Post: MWJONES
  NEWBIE sparkey0151 0 6,559 25-06-2015, 07:01 PM
Last Post: sparkey0151
  Hello. Newbie Q re self fitting gate openers palmiye 4 17,528 28-04-2015, 08:51 AM
Last Post: palmiye
  Newbie from West Yorkshire Michael22 0 5,325 15-02-2015, 04:34 PM
Last Post: Michael22
  Newbie From Eire Daragh 0 5,189 08-11-2014, 08:50 PM
Last Post: Daragh
  Newbie jtn01844 0 7,188 12-12-2012, 08:51 PM
Last Post: jtn01844

Forum Jump:


Users browsing this thread: 1 Guest(s)