Thread Rating:
  • 353 Vote(s) - 2.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gate Key Switch Problem
#1
My Fadini PRIT 19 keyswitch seems to have failed but I'm not sure. It has 4 terminals;
1; Common
2; Close
3; Open
4; Stop.

To test the wiring if I conected 1 and 3 wires together outside of the keyswitch should the gates open or is it more complicated than that.

I have connected wires 1 and 3 to a basic one function EasyGates keyswitch but that doesn't work.

The Stop button works on the Fadini OK.

Not sure how to proceed forward, maybe it's not the keyswitch!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Photocell Problem marcoos_1 4 18,899 04-01-2024, 10:23 AM
Last Post: JoeF
  Holding the Gate Open mgb 1 3,472 11-07-2023, 01:35 PM
Last Post: JoeF
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,762 03-07-2023, 08:54 AM
Last Post: Michael
  BFT gate and Hikvision wiring help Gowrie 0 3,381 26-05-2023, 02:05 AM
Last Post: Gowrie
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 3,303 25-05-2023, 03:55 PM
Last Post: Kaala1
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,209 15-05-2023, 11:25 AM
Last Post: Nemen3242
  gate stop broke - any spares=liftmaster 300 bomitie 2 4,030 04-05-2023, 04:02 PM
Last Post: bomitie
  Electric gate help PLEASE Be8st 5 6,041 18-10-2022, 09:26 AM
Last Post: SamA
  Bft gate one door stopping Matty c 3 7,613 19-04-2022, 09:13 AM
Last Post: benbrooks
  2014 model BFt rolling gate automation lauriston 1 6,232 07-03-2022, 11:11 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)