Thread Rating:
  • 421 Vote(s) - 2.9 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CB11 Programming Problem
#1
Hi All,

I have a single Sub300 Motor operating a single leaf gate, a Magnetic Lock, 2 sets of Chamberlain Photocells all operated using a CB11 control board. The system is set in Standard operating mode. The problem I am having is setting the soft stop/slow run. Each time I try to Program the "Advanced" distance covered according to the manual using the L1 button the board is not remembering the Soft stop timings. As a result the gate is slamming back against the Kerb and has sheared the bolt holding the arm in place in the Sub300 box. The gate is also hitting the Magnetic lock with force and will not slow run against the lock. Could there be a fault with the board itself or am I missing something in the set up?
Reply
#2
Sounds like a setup problem it can be arkward to programme single gate as the instructions are a little confussing. You need to programme the open then wait for 30 seconds for the board to realise that its a single gate then program the close limits and slow down
EasyGates Manuals - Directory of Manuals and Help Guides

Smart Home Matters - Smart Home News
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CB11 Multiple Keypad support Pigsfoot 1 2,138 12-08-2022, 08:14 AM
Last Post: Michael
  Problem with delay time CB11 milan 2 10,808 04-10-2021, 01:44 AM
Last Post: DesmondVog
  Chamberlain Liftmaster gate problem CB1 Armstrong 2 30,592 13-06-2019, 11:46 AM
Last Post: Pop Alexandra
  LiftMaster SUB300M + CB11 fault jonesy1991 0 10,769 25-01-2016, 02:51 PM
Last Post: jonesy1991
  CB11 controller BrianP 2 13,772 16-09-2015, 08:58 AM
Last Post: Gateguy
  CB22 problem??? Bakota 0 9,216 16-11-2014, 02:25 PM
Last Post: Bakota
  Remote problem Nickhh 1 9,845 30-09-2014, 04:48 PM
Last Post: Technologic Systems
  liftmaster CB11 hold gate open problem sparkey 5 29,991 13-05-2013, 08:17 AM
Last Post: brucekwilles
  Problem with CB11 Board Michael 1 11,520 08-05-2013, 11:32 AM
Last Post: Mark
  Chamberlain Liftmaster gate problem CB1 tentotwo 1 12,925 28-03-2012, 12:55 PM
Last Post: Mark

Forum Jump:


Users browsing this thread: 1 Guest(s)