Thread Rating:
  • 431 Vote(s) - 2.81 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BFT Barrier Programming
#1
Is there anyone who has experience of programming a raised arm barrier using the BFT Proxima Programmer. I need to programme 25 key fobs for a residential car park using the Proxima as we need to be able to delete individual key fobs if need be.

The instructions are a nightmare to use and really not sure where to start.

Can anyone give me a simple step by step instruction to getting started on this?

Thanks
Reply
#2
I have the same problem to be honest... Manual is rubbish
www.webseb.co.uk

!!! Gate and Door Automation Engineers required (London, TW) !!!
Reply
#3
I am Sorry i dont have any instructions for the BFT Proxima Barrier system.

Hopefully www.bft.co.uk should be able to help you with some instructions for that system
EasyGates Manuals - Directory of Manuals and Help Guides

Smart Home Matters - Smart Home News
Reply
#4
Just done a install with the proxima it is fun to say the least. ;(
The install was with 60 remotes into 7 different panels and various clonix receivers etc.
Fire me a pm across with any questions I will try my best.

But I agree the manual is no use at all. I had to set mine up at the work shop with all the panels / receivers and remotes in front of me.
As I did it and I figured each bit out I wrote myself my own guide so when I have to do it again I had something to look at. Its not easy enough just to remember unfortunately.
Makers and installers of fine gates for over 60years
Reply
#5
Also forgot to mention that my proxima is only 3 months old but it required a firmware update to work which you may need to do also to make yours work correctly.
Makers and installers of fine gates for over 60years
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Sad Proteco RX3 Remote programming davec. 2 15,498 09-02-2011, 11:05 AM
Last Post: Guest

Forum Jump:


Users browsing this thread: 1 Guest(s)