Thread Rating:
  • 231 Vote(s) - 2.77 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The gear turned a bit more causes the rack no longer in contact with gear
#1
Sad 
Hi there,

My GiBiDi sliding door malfunctioned today. When I opened the gate, the gear turned a bit more than usual, and so the rack is no longer in contact with the motor gear. Now the door will not close.

I got the following info from the gear motor box for your information:

Type: PASS4PLUS
Code: 92104
SN: P4P000000275

I guess the open and closing limit of the sliding door should be adjustable. But after I moved in this property the former owner lost the operation manual. Could someone please tell me how to do that? I googled internet but didn't find the manual. It will be greatly appreciated if someone could send me a copy of the operation manual.

Many thanks!

Jason
Reply
#2
You can find manual here Gibidi

On page 7 you can see magnetic limit switches. Try to adjust them (make sure that you have isolated power before!)
www.webseb.co.uk

!!! Gate and Door Automation Engineers required (London, TW) !!!
Reply
#3
Many thanks! I found the magnetic limit switches and I will try to adjust following the manual.

Jason

(17-01-2012, 05:17 PM)sebabastek Wrote: You can find manual here Gibidi

On page 7 you can see magnetic limit switches. Try to adjust them (make sure that you have isolated power before!)

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)