Thread Rating:
  • 9 Vote(s) - 2.44 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MHouse SL1-10 partial close
#1
Hi there,

I'm having a strange issue with my gate and hoping someone can please help.

My MHouse SL1-10 gate has for the past week only been closing to about 30% closed. It slows down prior and then the switch can be heard in the motor - it doesn't just stop mid-way at full speed like you'd expect if there was an obstruction. It opens normally from both the 100% closed and 30% closed positions, so its not an encoder issue. We've also figured out a work around by hitting the gate remote button 2 times in quick sucession from the 30% closed position. If this is done anywhere from say 25-0% closed, the gate will stop at about 30% again.

I've followed the procedure of using the OPEN button to re-learn the gate limits from the halfway mark, which works without issue. However the above problem persists afterwards during normal operation via any of the remotes.
 
I then did a factory reset by holding down P2 and P3 for 10s, confirmed the reset had worked by checking the remotes and gate OPEN buttons no longer work, re-learnt the ECSBUS by holding P2 for 3s and then went through the learning gate limits process again. This time when learning the limits the speed was slow the entire time, as expected. However after learning the limits correctly, normal operation results in the gate still coming to a gradual stop at 30% closed.

I'd really appreciate any advice on what to do. Thanks.
Reply


Messages In This Thread
MHouse SL1-10 partial close - by NAT - 24-04-2022, 10:04 AM
RE: MHouse SL1-10 partial close - by SamA - 03-05-2022, 10:08 AM
RE: MHouse SL1-10 partial close - by NAT - 08-05-2022, 11:43 AM
RE: MHouse SL1-10 partial close - by SamA - 16-05-2022, 11:49 AM
RE: MHouse SL1-10 partial close - by NAT - 28-05-2022, 04:56 AM
RE: MHouse SL1-10 partial close - by SamA - 30-05-2022, 09:15 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Mhouse cl2 error p2 and p3 flashes Ragnarevartov 1 298 20-03-2024, 11:19 AM
Last Post: Aiden Mitton
  Mhouse cl2 ESBus error - gate not operating yeatsie 1 961 30-01-2024, 10:35 AM
Last Post: benbrooks
  Mhouse left gate blocking full open when initialising gates neil.conner 1 1,170 24-08-2023, 01:51 PM
Last Post: Aiden Mitton
  Mhouse SL1 won't close correctly Dartman 5 7,394 03-02-2023, 12:04 PM
Last Post: JoeF
  Mhouse WH2S not opening SamGate 4 3,595 10-10-2022, 09:46 AM
Last Post: Michael
  MHouse SL10 closes, but doesn't open cambo 1 2,996 19-08-2022, 09:29 AM
Last Post: benbrooks
  Mhouse WS2 Gates not closing together pauln0301 1 5,207 13-04-2022, 11:18 AM
Last Post: Michael
  Mhouse WG20 Alex74 1 5,725 04-02-2022, 11:05 AM
Last Post: Michael
  MHouse WS2S Bricodust 2 9,334 30-03-2021, 01:26 PM
Last Post: Bricodust
  MHouse WG2 Manual Release mousetarget 1 7,547 30-03-2021, 12:21 PM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)