Mindy A824 Controller - OK Light Flashing

[JoeF]

Hi All,

I have the same problem with the OK Led flashing approx. 7-8 times then repeating.

The first 3 LED on the lower right are on.

Any diagnosis or fix ?

Heres hoping.

Paul

Hi Paul,

it could be one of the following possible faults...

7 Flashes -Electric circuits fault -
Wait at least 30 seconds, then try sending a command and if necessary turn off the power supply. If the condition persists, there may be a malfunction and the electronic board must be replaced.

8 Flashes - A command is already present that disables execution of other commands -
Check the type of command that is always present; for example, it could be a command from a timer on the “open” input.

Hope this helps.