Thread Rating:
  • 479 Vote(s) - 2.84 Average
  • 1
  • 2
  • 3
  • 4
  • 5
not opening
#1
Hello,

i have some BFT phobos gates fitted which have developed a problem over the winter. I have got 2 6ft wide wooden gates operating of the system.

one side works fine but the other side will not open. when you press the fob button you will hear the noise of the motor starting but then it will stop, the tension will be taken up on that gate but will just not open.

i have tried putting the gates at the 45deg position in manual mode then activating them, both gates will work (so i know the motor is ok) but once it gets into either the open or closed position it will not work again. you just get the tension on the gate taken up and then nothing.

any help would be appreciated.

thanks
neil
Reply


Messages In This Thread
not opening - by nskeates - 26-03-2010, 10:40 AM
RE: not opening - by nskeates - 30-03-2010, 07:38 AM
RE: not opening - by sebabastek - 30-03-2010, 07:03 PM
RE: not opening - by easygates - 31-03-2010, 05:03 PM
RE: not opening - by nskeates - 30-03-2010, 07:49 PM
RE: not opening - by sebabastek - 30-03-2010, 09:10 PM
RE: not opening - by nskeates - 31-03-2010, 07:59 AM
RE: not opening - by sebabastek - 31-03-2010, 07:53 PM
RE: not opening - by nskeates - 31-03-2010, 09:16 PM
RE: not opening - by sebabastek - 31-03-2010, 10:05 PM
RE: not opening - by nskeates - 01-04-2010, 06:48 AM
RE: not opening - by sebabastek - 01-04-2010, 07:35 AM
RE: not opening - by nskeates - 01-04-2010, 07:49 AM
RE: not opening - by sebabastek - 01-04-2010, 08:26 AM
RE: not opening - by nskeates - 01-04-2010, 08:33 AM
RE: not opening - by sebabastek - 01-04-2010, 08:43 AM
RE: not opening - by nskeates - 01-04-2010, 08:23 PM
RE: not opening - by sebabastek - 01-04-2010, 09:36 PM
RE: not opening - by nskeates - 02-04-2010, 08:07 AM
RE: not opening - by sebabastek - 02-04-2010, 09:10 AM
RE: not opening - by nskeates - 02-04-2010, 09:55 AM
RE: not opening - by sebabastek - 02-04-2010, 02:25 PM
RE: not opening - by nskeates - 02-04-2010, 08:10 PM
RE: not opening - by nskeates - 03-04-2010, 07:36 AM
RE: not opening - by sebabastek - 03-04-2010, 12:52 PM
RE: not opening - by nskeates - 06-04-2010, 09:56 PM
RE: not opening - by sebabastek - 06-04-2010, 10:01 PM
RE: not opening - by nskeates - 07-04-2010, 10:07 AM
RE: not opening - by Guest - 29-04-2010, 11:51 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  BFT Sliding Gate randomly opening and closing AdrianMate 1 612 14-02-2024, 12:18 PM
Last Post: Michael
  BFT opening problem 8 44,927 08-08-2023, 02:14 PM
Last Post: JoeF
  BFT SubR not opening/closing sometimes Jimmyboy4 3 2,885 09-01-2023, 10:29 AM
Last Post: SamA
  BFT Lux 2B FC Motor not opening all the way to stopper jc.34@outlook.com 8 8,258 19-08-2022, 09:30 AM
Last Post: JoeF
  Strange opening problem Baz1981 4 81,568 15-07-2019, 08:39 AM
Last Post: SamA
Question Bft Rigel 5 Gates - Sticking when opening dannys1 3 57,636 23-04-2019, 10:11 AM
Last Post: JoeF
  BFT A 40 not opening tojo 0 5,991 06-12-2017, 11:29 PM
Last Post: tojo
Question Bft Rigel 5 Gates - Sticking when opening dannys1 3 17,185 23-08-2017, 02:39 PM
Last Post: Access-Control-Ltd
  Strange Gate Opening Issue scottc 5 29,378 09-06-2017, 03:41 PM
Last Post: Automatic-TC
  BFT P7 Opening Time / Not Completing Stroke zootreeves 2 12,833 07-01-2016, 08:40 PM
Last Post: zootreeves

Forum Jump:


Users browsing this thread: 1 Guest(s)