Thread Rating:
  • 20 Vote(s) - 2.55 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Came gates
#1
Hi all, help needed.
I have a set of came ati gates, pcb za3 and until a few months ago  were working fine. I had a problem with them not closing, this was resolved by removing the wiring  from the photocells, intercom and push button in the house, and connecting terminals 2 and c1. Just recently I had a local company quote me £500 to reconnect the photo cells, intercom and push button which seems extremely expensive. The guy said some of wiring needed replacing.
I'm an electrician by trade, but just need help in knowing how the wiring goes for reconnecting the external components on the terminal block.
Also the dip switches, not sure wether they were changed when the original problem occured. So would like to know which ones need to be on or off.
Thanks in advance Martin
Ps. The intercom is a videx gsm 4000 series
Reply
#2
(04-07-2019, 10:25 PM)Ring8180 Wrote: Hi all, help needed.
I have a set of came ati gates, pcb za3 and until a few months ago  were working fine. I had a problem with them not closing, this was resolved by removing the wiring  from the photocells, intercom and push button in the house, and connecting terminals 2 and c1. Just recently I had a local company quote me £500 to reconnect the photo cells, intercom and push button which seems extremely expensive. The guy said some of wiring needed replacing.
I'm an electrician by trade, but just need help in knowing how the wiring goes for reconnecting the external components on the terminal block.
Also the dip switches, not sure wether they were changed when the original problem occured. So would like to know which ones need to be on or off.
Thanks in advance Martin
Ps. The intercom is a videx gsm 4000 series
Hi,

what brand of photocells do you have are they hard wired or battery photocells?
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Came FROG-A + ZA3 controller > gates wont close safety beam endam 6 7,524 23-02-2023, 01:09 PM
Last Post: SamA
  Gates out of sync frankjboyd 5 16,327 05-01-2023, 11:52 AM
Last Post: SamA
  Came Gates Error code E14 janker 3 5,396 14-11-2022, 11:59 AM
Last Post: benbrooks
  My Came ZM3E gates won’t open golfnut75 1 4,884 12-08-2022, 08:40 AM
Last Post: SamA
  ZA3 Came gates not opening with RF device chooper 5 6,960 24-06-2022, 08:58 AM
Last Post: JoeF
  Came Gates - power cut issues Paddy_SP 2 6,942 22-07-2021, 09:42 AM
Last Post: Paddy_SP
  Came Double Swing Gates opens by itself for some centimeters risp73 0 8,556 19-06-2020, 06:19 PM
Last Post: risp73
  Frog - ZA3: gates won't open BarryD 0 10,155 15-06-2016, 01:34 PM
Last Post: BarryD
  CAME double gates - one side closes but will not open crliving 1 17,090 02-08-2013, 09:39 AM
Last Post: Blakey111
Rolleyes 400 Newton limit on boarded gates Paul smith 3 21,602 12-01-2012, 11:20 AM
Last Post: sebabastek

Forum Jump:


Users browsing this thread: 2 Guest(s)