Thread Rating:
  • 151 Vote(s) - 3.2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Q60A/R error. Showing "_ "
#1
Hi there,

I found water inside the my proteco automation central case.
One fuse have blown. I've changed it but now show me the following error:
On stand by it only shows "_ ", and when cycling throuh the button A (the only button that does anything) it is showing
the following.

Q60 error video

Ty in advance for an help!
Reply
#2
(02-11-2017, 08:25 PM)Jonas Pistolas Wrote: Hi there,

I found water inside the my proteco automation central case.
One fuse have blown. I've changed it but now show me the following error:
On stand by it only shows "_ ", and when cycling throuh the button A (the only button that does anything) it is showing
the following.

Q60 error video

Ty in advance for an help!

hi

You should at the begining take the central to the house and dry it .

which fuse blow up ? high voltage or low
Best Regards 
Tom 
Automatic-TC
Reply
#3
The 5A fuse was the one that had blow up.

I already dried everything very well, but with no sucess.. ?
Reply
#4
(03-11-2017, 05:13 AM)Jonas Pistolas Wrote: The 5A fuse was the one that had blow up.

I already dried everything very well, but with no sucess.. ?
hi
http://manuals.easygates.co.uk/PDF/misc/mygate.pdf

you should check all accessories photo,receiver etc ...... with manual you can try to programing once again ..
Best Regards 
Tom 
Automatic-TC
Reply
#5
Thank you for the manual.. i already got it, and none of the central error messages are described on the manual. I'm not able to do any programming, as a reset.
I already disconnected everything, and nothing changes...

I was wondering if there is a way to force the central to a reset...

Bests,


(03-11-2017, 07:58 AM)Automatic-TC Wrote:
(03-11-2017, 05:13 AM)Jonas Pistolas Wrote: The 5A fuse was the one that had blow up.

I already dried everything very well, but with no sucess.. ?
hi
http://manuals.easygates.co.uk/PDF/misc/mygate.pdf

you should check all accessories photo,receiver etc ...... with manual you can try to programing once again ..
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Proteco Advantage (Q60A) Error Code "03" CLAUDIOTX 3 17,854 26-09-2023, 05:32 AM
Last Post: max666
Exclamation Proteco Q60A stopped working xCO 0 940 19-06-2023, 01:03 PM
Last Post: xCO
  Replacement Q60A board? ndyhzlwd 1 1,851 10-02-2023, 03:19 PM
Last Post: SamA
  Hello - Another Proteco Q60A/R Question! SawboMan 2 3,020 12-07-2022, 11:48 AM
Last Post: SamA
  Proteco Q60 - FH error then close after opening Needlerp 1 2,310 24-06-2022, 09:54 AM
Last Post: JamieF
  proteco q60a microcontroller program arashkhan 1 2,538 17-06-2022, 01:29 PM
Last Post: benbrooks
  Thalia P - BAR error devsolo 2 9,353 07-01-2021, 04:05 PM
Last Post: GilbertoMoncada
  Deimos BT 400/600 error codes orange 0 3,860 07-12-2020, 09:36 AM
Last Post: orange
  Fav sliding gate error code plus other Adam67 0 8,974 02-09-2020, 07:06 PM
Last Post: Adam67
  Re: Error 30 tony.jay8 2 11,000 10-05-2018, 11:17 PM
Last Post: tony.jay8

Forum Jump:


Users browsing this thread: 1 Guest(s)