Electric Gates, Garage Door, Access Control, Smart Home & Security Forums
Manual release key - Printable Version

+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Manual release key (/showthread.php?tid=68)

Manual release key - Gerryburn - 06-05-2009

Hi there, first post so here goes!

I need to get a manual release key for my electric gates but cannot identify the make. The release key hole is a hollow cylinder with two ridges inside. I attach some pics which may assist. Could anyone tell me what I'm looking for and where I might source it?

Many thanks

Gerry

               

RE: Manual release key - Home IQ - 08-05-2009

Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl

RE: Manual release key - Gerryburn - 08-05-2009

Hi Carl,

That's great - I'll measure the diameter and get back to you.

Cheers and thank you

Gerry

Home IQ Wrote:Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl


RE: Manual release key - Gerryburn - 11-05-2009

Hi Carl

The diameter of the hole on the gate is 15mm.

I look forward to hearing from you.

Many thanks

Gerry


Gerryburn Wrote:Hi Carl,

That's great - I'll measure the diameter and get back to you.

Cheers and thank you

Gerry

Home IQ Wrote:Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl


RE: Manual release key - Home IQ - 12-05-2009

Hi Gerry,

Thats the size of my release levers i have, PM me your address and i will send you one,

thanks

Carl

RE: Manual release key - BarkerandGeary - 09-06-2009

For you information Gerry
The releases and motors and releases you posted are the saimatic sub motors
as seen here
http://www.theelectricgateshop.co.uk/latest_detail.asp?prod_id=1271&id=&grpid=1271&msg=&offset=0

replaced 2 of these motors recently