+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: CAME ZM3E (/showthread.php?tid=6747)
CAME ZM3E - Mike2006 - 28-09-2020
Hi,
I have a FROG motor installation with 2x swing gates.
In place working well for 7 yrs (except for slugs taking out 2 x pcb boards)
Today, one side will not close. It attempts to close but then stops and goes back to fully open.
Even when I run the encoder test, the same thing happens (M1 opens fully and M2 tries to close and stops after a few inches of travel.
I only have photocells as a safety input device.
Any thoughts to the problem here?
Thank you,
Mike