+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Nice Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=22)
+--- Thread: Mc824h hold open (/showthread.php?tid=6714)
Mc824h hold open - Simonizzy - 21-06-2020
I have 2 toona fitted to a mc824h , pair of photo cells, comelit gate access and on2e two button remote paired to an oxi receiver. All working well. I have the gates set to auto close after 3o seconds
I would like to program the second button on the remote so I can hold the gates open over riding the auto close when I'm expecting a delivery etc.
Can anyone advise how to do this
Thanks
RE: Mc824h hold open - lestersoto - 04-07-2020
buen post!
RE: Mc824h hold open - RyanB - 20-07-2020
(21-06-2020, 07:14 AM)Simonizzy Wrote: I have 2 toona fitted to a mc824h , pair of photo cells, comelit gate access and on2e two button remote paired to an oxi receiver. All working well. I have the gates set to auto close after 3o seconds
I would like to program the second button on the remote so I can hold the gates open over riding the auto close when I'm expecting a delivery etc.
Can anyone advise how to do this
Thanks
You do not need to program a second button. All that is required is to press the button you use to open a second time just before the gate is fully open at the gate stops. This will send a stop command and 'hold' the gates open until another command is sent.