Electric Gates, Garage Door and Access Control Help
FAAC400 issues after oil top up - Printable Version

+- Electric Gates, Garage Door and Access Control Help (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: FAAC Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=31)
+--- Thread: FAAC400 issues after oil top up (/showthread.php?tid=6548)



FAAC400 issues after oil top up - lemsip81 - 14-10-2019

Hi
I have a single leaf Faac400 CBAC (older style with oil filler underneath key lock) opener on a 5 bar gate.  All has been working fine for about 4 years.   I decided to check and top up the hydraulic oil in the unit.

After topping up i have an issue where the gate will open but stop halfway, and then won't initiate the motor to close the gate.  I've tried doing a "re-learn" but even when in learning mode the gate stops halfway open, and then when i exit learning mode, the gate won't shut.

Would i be right in thinking I maybe have an issue with the pressure/anti-crush screws? or air in the system?  or something else?

from what I can see, and based on the gate working up until my filling with oil, the electronics (Faac450D) are working as they should.

thanks in advance