+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Member Discussions (https://www.gateguide.co.uk/forumdisplay.php?fid=33)
+--- Forum: General Discussions (https://www.gateguide.co.uk/forumdisplay.php?fid=35)
+--- Thread: safety edge problem (/showthread.php?tid=5342)
safety edge problem - gandalf-the-white - 20-08-2016
Hi folks first time posting
I have a problem with a bircher safety edge on a set of steel gates the batteries are only lasting about 2 weeks causing control panel to go into fault condition (came ZLJ24) I suspect faulty transmitter any help would be appreciated
Regards Lee
RE: safety edge problem - Sav - 01-09-2016
Hi,
I would first test all safety edges on the system. Disconnect them and test for 8.2kohm on each one. If this is correct then it will be either a battery issue on the transmitter or a faulty transmitter.
Hope this helps.