+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: ZBK Master/Slave problem (/showthread.php?tid=5128)
ZBK Master/Slave problem - Steve Jefferson - 05-11-2014
Hi, I have just installed a 2nd ZBK controller. I have followed the instructions and put all my controls on the Master and linked terminals 2 and Mtr2 on each controller. The slave gate does nothing but the Master works fine. I have set the correct dip switches for the gates. I would appreciate any help. Thanks (I am in New Zealand)
RE: ZBK Master/Slave problem - Steve Jefferson - 09-11-2014
(05-11-2014, 12:10 PM)Steve Jefferson Wrote: Hi, I have just installed a 2nd ZBK controller. I have followed the instructions and put all my controls on the Master and linked terminals 2 and Mtr2 on each controller. The slave gate does nothing but the Master works fine. I have set the correct dip switches for the gates. I would appreciate any help. Thanks (I am in New Zealand)
Thanks but I have got it sorted, I found a faulty limit switch on the original controller.