+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Member Discussions (https://www.gateguide.co.uk/forumdisplay.php?fid=33)
+--- Forum: Introduce Yourself (https://www.gateguide.co.uk/forumdisplay.php?fid=34)
+--- Thread: Newbie with a headache! (/showthread.php?tid=4926)
Newbie with a headache! - Suprabandit - 09-01-2014
Hi all,
Im dave and i have just received the moovo XW432Pe electric gate openers. safe to say i was extremely excited and impressed by the buid quality etc of this and cant wait to get it fitted.
Thats where im stuck as i have no idea at what angle the bracket should be at. i will post further in the relevent section and all help and advice will be greatly received.
RE: Newbie with a headache! - Sav - 09-01-2014
(09-01-2014, 12:28 PM)Suprabandit Wrote: Hi all,
Im dave and i have just received the moovo XW432Pe electric gate openers. safe to say i was extremely excited and impressed by the buid quality etc of this and cant wait to get it fitted.
Thats where im stuck as i have no idea at what angle the bracket should be at. i will post further in the relevent section and all help and advice will be greatly received.
Hello
its quite straight forward, if you look on the chart for the angle a and b measurement, these measurements should sit at a minimum of 150 x 150mm from the hinge point to the pivot point
please do not hesitate to contact us for further instruction