+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: BFT Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=7)
+--- Thread: bft lux2b (/showthread.php?tid=188)
bft lux2b - fly747 - 20-04-2010
Hello,
I've refilled my hydraulic ram with idrolux oil after a repair. But now when my actuator isn't used for some time there is no movement. The motor is running. If I turn the force adjustement screws a bit then the actuator moves again, but after a while it doesn't move anymore.
Is there something I've forgotten?
Thanks
RE: bft lux2b - fly747 - 20-04-2010
Problem is solved, the vent hole was blocked by something.
RE: bft lux2b - fly747 - 30-04-2010
Problem returns.
Now I know the bleed hole isn't blocked because oil comes out. But when the actuator isn't used for about an hour it doesn't move.
Any ideas?
Thanks