Thread Rating:
  • 288 Vote(s) - 2.72 Average
  • 1
  • 2
  • 3
  • 4
  • 5
teaching a new remote with CB11
#1
I have just had a pair of gates installed with sunken motor controls and CB11 controller. When attempting to teach a new handheld opener (type 94335E) following the instructions provided. Only the LHS gate opens or closes, the RHS stays closed.
Could somebody please help me on this one.

Many Thanks.

Gary.
Reply
#2
Hi Gary
Firstly I would check your motor wiring from the RHS in the CB11 panel
Reply
#3
You might have pressed CH2 when "learn".
CH2 is for pedestrian-mode that opens the one side only.
Try to "learn" the remote again by pressing CH1 first, then press the remote to learn car-mode to open both sides.
Reply
#4
All remotes need to be programmed into CH1 on a CB11 control panel as CH2 is for pedestrian mode.


If you press CH2 and Hold it in untill the light goes out that will clear CH2 of all remotes then program the remote into CH1
EasyGates Manuals - Directory of Manuals and Help Guides

Smart Home Matters - Smart Home News
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Replacement remote Chindley 1 1,707 06-12-2023, 03:00 PM
Last Post: Matt Turner
  Master to slave remote problem Dingerb 0 1,570 24-12-2021, 01:26 PM
Last Post: Dingerb
  V2 Phox 2-Channel Remote Control moldy1 3 11,603 02-04-2020, 12:39 PM
Last Post: JoeF
  Help programming SUN 433 4CH remote jedimatafez 2 8,185 24-02-2019, 08:04 AM
Last Post: jedimatafez
  Programming remote Luke 1 8,157 16-05-2018, 07:38 PM
Last Post: Automatic-TC
Question Impulse versus permanent “push button” remote control ajberna 1 10,831 08-08-2017, 02:02 PM
Last Post: alexandru.catrina@gmail.com
  Proteco remote gate programing Krile007 1 17,717 07-02-2014, 10:35 AM
Last Post: Sav
  BFT Rigel 5 Remote sync Nicks 1 11,893 01-03-2013, 02:15 PM
Last Post: Mark
  cloning remote supermeske 0 6,174 22-11-2012, 08:57 PM
Last Post: supermeske
  HELP !AMIGO GENIUS LOST REMOTE Bryanharry 0 6,668 15-11-2012, 02:56 PM
Last Post: Bryanharry

Forum Jump:


Users browsing this thread: 1 Guest(s)