Thread Rating:
  • 88 Vote(s) - 2.52 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nice mc842h cable connection to gate lock
#1
Hello 

Does the cable used to vonnect the gate conyrol unit need to be sheilded?   Total run from control unit to lock 15 meters.  Sorry to ask but have a unit usinh sheilded cable with outer sheild not grounded at any point. And looks like the original installer used what ever was available
Reply
#2
hi

is that wire used for operating that gate (push button ? )
if the wire is buried together with power cable yes it have to be shielded.
Best Regards 
Tom 
Automatic-TC
Reply
#3
Hi.

Cable is used to drive a 12 volt strike lock. And partialy run with the power cable. I will run sheilded if i csn find in town. In rural Spain so not easy for parts.


Thanks
Reply
#4
shielded cable is not required in this case
Best Regards 
Tom 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Disable Open hold On NICE NC824 paul@blxnetworks.co.uk 4 1,670 02-10-2023, 09:20 AM
Last Post: benbrooks
  Nice Gates not closing StuL 1 1,347 24-08-2023, 01:34 PM
Last Post: JoeF
  Holding the Gate Open mgb 1 3,462 11-07-2023, 01:35 PM
Last Post: JoeF
  Nice Moonbus Photocells - Faulty? ddaddy 2 1,927 11-07-2023, 01:33 PM
Last Post: JoeF
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,753 03-07-2023, 08:54 AM
Last Post: Michael
  Nice HS400 Andruelectricgates 0 904 09-06-2023, 09:28 PM
Last Post: Andruelectricgates
  BFT gate and Hikvision wiring help Gowrie 0 3,372 26-05-2023, 02:05 AM
Last Post: Gowrie
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 3,295 25-05-2023, 03:55 PM
Last Post: Kaala1
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,191 15-05-2023, 11:25 AM
Last Post: Nemen3242
  gate stop broke - any spares=liftmaster 300 bomitie 2 4,022 04-05-2023, 04:02 PM
Last Post: bomitie

Forum Jump:


Users browsing this thread: 1 Guest(s)