Thread Rating:
  • 107 Vote(s) - 2.82 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nice Robus 600 Photocells
#1
I have replaced sliding gate opener with Nice Robus 600 and I am having problems with photocells. Original Photocell that is fitted is RP25 reflective photo electric switch. New motor has bluebus control. Do I need to replace the photocell or can I connect existing photocell to new robus 600 motor. I tried connecting photocell across open contacts on robus 600 it seemed to work fine if gate was closing and I broke the beam gate would open again. Only problem is that when gate is fully closed if my dog runs up to the gate and breaks the beam the gate opens. Do photocells have to be connected to bluebus circuit. I only want photocell for safety to ensure that gate wont close whilst car is in its path. Can anyone help with this problem please. I have a set of V2 Sensiva xs photocells which I could fit if these could do the job. Any advise would be greatly appreciated. Many Thanks. Les
Reply
#2
hi

only two wires photocells for bluebus magistrala instalation
MOFB BLUEBUS


technically there is second option

between STOP and PP terminals there is 24 v dc output that where you can power up your uniwersal photocell .
And photocell relay output going to STOP terminal . DO you have manual ?
Best Regards 
Tom 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Disable Open hold On NICE NC824 paul@blxnetworks.co.uk 4 1,671 02-10-2023, 09:20 AM
Last Post: benbrooks
  Nice Gates not closing StuL 1 1,349 24-08-2023, 01:34 PM
Last Post: JoeF
  Nice Moonbus Photocells - Faulty? ddaddy 2 1,933 11-07-2023, 01:33 PM
Last Post: JoeF
  Nice HS400 Andruelectricgates 0 904 09-06-2023, 09:28 PM
Last Post: Andruelectricgates
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,199 15-05-2023, 11:25 AM
Last Post: Nemen3242
  FAAC Photocells mmc1977 3 2,275 02-05-2023, 12:37 PM
Last Post: Matt Turner
  Nice Robus RB100 - Control Board Buttons Not Working sl991 5 4,051 02-12-2022, 02:51 PM
Last Post: JoeF
  Nice motor Vandamme911 1 1,793 01-12-2022, 10:31 AM
Last Post: JoeF
  Robus 600 not closing fully All Well 11 8,841 03-08-2022, 02:42 PM
Last Post: benbrooks
  Came ZLJ24Z - close immediately photocells are clear Enginear1 0 1,937 29-10-2021, 10:47 PM
Last Post: Enginear1

Forum Jump:


Users browsing this thread: 1 Guest(s)