Thread Rating:
  • 131 Vote(s) - 2.57 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CB1 How to learn the gates
#1
Hi, I have a gate with two arms that that used to open/close together but after I tried to adjust some of the settings (not really knowing what I was doing) to limit the opening span and gate force the gates no longer open/close together. One will open about 4 inches then it will open half way. The then another time it will open fully and the other gate will open after, then not at all - all totally random.

Do I need to "re-learn" the gates and if so how?

Thanks in advance!
Reply
#2
Hi,

Thank you for your enquiry, it might be wise to start with a reprogramming phase, this can be done by following the instructions from the CB1 manual which i have posted a link to below.
http://manuals.easygates.co.uk/PDF/misc/cb1.pdf
Once this has been done let me know what is happening with the system and we can then run through some diagnostics over the phone on 01384 569942.
Kind Regards
Tim
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  My swing gates are stuck at 50% open jctrotting 0 73 25-03-2024, 12:41 AM
Last Post: jctrotting
  Sliding gates are opening/closing like someone is going in /out. gandreja 3 8,167 14-04-2020, 01:45 PM
Last Post: RyanB
  Liftmaster CB1 gates started to open themselves telnet123 4 25,019 01-01-2020, 09:43 AM
Last Post: pronosoft
  Gates dont close after being held open jaybee 1 11,563 18-06-2013, 09:23 AM
Last Post: Blakey111

Forum Jump:


Users browsing this thread: 1 Guest(s)