You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Thread Rating:
  • 7 Votes - 1.86 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
BFT LUX FC-2B with no stops
09-10-2017, 04:43 PM
Post: #1
BFT LUX FC-2B with no stops

Just replaced one gate motor (BFT LUX FC-2B) (like for like)
The leaf work fine but the gate goes past the normal end point by a couple of centimetres. Am I right in thinking that the only adjustment to bring it back slightly is the nut at the end nearest to the ball joint?

Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump: