Thread Rating:
  • 154 Vote(s) - 3.17 Average
  • 1
  • 2
  • 3
  • 4
  • 5
liftmaster cb124ev
#1
Hi everyone i was looking for some help to wire the control box.
most of the terminals appear straight forward within terms of being labeled up
however the transformer has 2 spade connectors which i can see where they go I'm just unsure of which way round
also has a blue and brown again same problem
any help would be appreciated
cheers lee
Reply
#2
(07-10-2017, 01:41 PM)leescafe Wrote: Hi everyone i was looking for some help to wire the control box.
most of the terminals appear straight forward within terms of being labeled up
however the transformer has 2 spade connectors which i can see where they go I'm just unsure of which way round
also has a blue and brown again same problem
any help would be appreciated
cheers lee
hi

thin wires goes to 240 v
thicker wires goes to 24 v

It is good to check it with an electric meter !
Best RegardsĀ 
TomĀ 
Automatic-TC
Reply
#3
ok i spose i could trace the back of the board to see wich way round the live and neutral go. the 24v side has 2 identical spade connections can they be put on any way round?
and thanks for the help by the way
Reply
#4
(08-10-2017, 06:48 AM)leescafe Wrote: ok i spose i could trace the back of the board to see wich way round the live and neutral go. the 24v side has 2 identical spade connections can they be put on any way round?
and thanks for the help by the way

HI spade connections can go either way round its AC
Reply
#5
(11-10-2017, 09:12 PM)biker-boss Wrote:
(08-10-2017, 06:48 AM)leescafe Wrote: ok i spose i could trace the back of the board to see wich way round the live and neutral go. the 24v side has 2 identical spade connections can they be put on any way round?
and thanks for the help by the way

HI spade connections can go either way round its AC

Thankyou
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Liftmaster sub 300 set up Iceice54 1 5,475 05-01-2020, 01:26 PM
Last Post: Iceice54

Forum Jump:


Users browsing this thread: 1 Guest(s)