You are not logged in or registered. Please login or register to use the full functionality of this board...


Post Reply 
 
Thread Rating:
  • 12 Votes - 2.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
BFT Icaro N F "ER 38" error?
10-07-2017, 02:42 PM
Post: #1
BFT Icaro N F "ER 38" error?
Hi there guys,

I have a gate that is controlled by a BFT Icaro N F controller.

When the button is pressed on the wireless remote control, the gate moves out but then gets 3/4 of the way across the road and then slows down and then starts coming back.

I see the error on the LED screen saying "ER 38"

Anyone have a guide for programming this controller and a list of error codes?

Thanks for your help,

Dan
Find all posts by this user
Quote this message in a reply
11-07-2017, 09:54 AM
Post: #2
RE: BFT Icaro N F "ER 38" error?
Hi Dan,

The error code ER38 refers to slowdown closing obstacle detection, hope this helps.

Tim
Find all posts by this user
Quote this message in a reply
11-07-2017, 10:37 AM
Post: #3
RE: BFT Icaro N F "ER 38" error?
Thanks for your help Tim, I can see this in the manual now.

It says "Amperostop" so I presume that the controller is detecting the current going high and reversing.

Since there is nothing in the way I guess I may have a tight spot that I need to check out.

Do you know if there are any parameters to check for the motor current?
Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  BFT ICARO Autoset Fail ybkang 0 1,828 20-03-2015 01:39 PM
Last Post: ybkang
  ICARO + LEO B CBB : Open gate at certain times? tommysharp 2 4,168 17-01-2014 12:48 PM
Last Post: thm
  ICARO + LEO B CBB : 12V power for keypad? tommysharp 4 3,341 16-01-2014 08:25 PM
Last Post: tommysharp
  ICARO + LEO B CBB : Hard wired push to exit button? tommysharp 2 2,500 09-01-2014 10:39 AM
Last Post: tommysharp
  BFT Icaro Wiring, photocells, safety edge markeymark 2 6,607 12-01-2012 11:32 AM
Last Post: sebabastek

Forum Jump: