Thread Rating:
  • 146 Vote(s) - 2.88 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Faac fuse blowing? 7PCB452/455 Issue 05a
#1
Hello!

We've only recently moved into an old house, which had electric gates installed. The gates just stopped working the other morning, no longer opening or closing.

I've done a full fuse sweep, and found there's a small 1a glass fuse blowing on the logic board of the control unit. See attached photo for the fuse that's blowing.

I've replaced it twice (same type as was already installed), but upon clicking the open button on my keys, that fuse immediately blows again.

Is that likely a sign of a blown control board, or something more involved?

Cheers!
Mark


Attached Files Image(s)
   
Reply
#2
Hiya. To quickly check your board. Remove all wiring between terminals 9 - 19. Then link out terminals 11, 12, 13, 14. Just daisy chain the wires together. Your are just linking out the stop and safety inputs. Give the gate an open command. If the fuse blows. Assuming you do mean the 800Ma fuse. The board may have shot it.
Reply
#3
(14-06-2017, 05:29 PM)Russ1804 Wrote: Hiya. To quickly check your board. Remove all wiring between terminals 9 - 19. Then link out terminals 11, 12, 13, 14. Just daisy chain the wires together. Your are just linking out the stop and safety inputs. Give the gate an open command. If the fuse blows. Assuming you do mean the 800Ma fuse. The board may have shot it.

hi

i think its worth to unscrew pcb mainboard and check how its look from behind , sometimes you can have some bugs sticked to it .
Best RegardsĀ 
TomĀ 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 452 pcb board benner91 2 1,575 09-02-2024, 06:13 PM
Last Post: benner91
  Faac photocell stopped working Zeb Gulickx 2 834 28-01-2024, 12:56 PM
Last Post: Zeb Gulickx
  Genius JA592 issue fintaneduffy 3 581 19-01-2024, 09:58 AM
Last Post: Michael
  FAAC E124 fault 05 allan@amtas.com.au 0 697 14-10-2023, 12:37 PM
Last Post: allan@amtas.com.au
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,756 03-07-2023, 08:54 AM
Last Post: Michael
  7pcb452/455 FAAC Alpin 0 1,188 23-06-2023, 03:19 PM
Last Post: Alpin
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 3,297 25-05-2023, 03:55 PM
Last Post: Kaala1
  FAAC Photocells mmc1977 3 2,275 02-05-2023, 12:37 PM
Last Post: Matt Turner
  water damage to FAAC photocell Rajab 4 3,533 18-07-2022, 09:00 AM
Last Post: Michael
  BFT IGEA BT issue warren5 1 2,809 13-04-2022, 11:49 AM
Last Post: Michael

Forum Jump:


Users browsing this thread: 1 Guest(s)