You are not logged in or registered. Please login or register to use the full functionality of this board...


Post Reply 
 
Thread Rating:
  • 16 Votes - 2.44 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
ORNO Video Doorphone -> NICE MC424
18-04-2017, 07:57 PM
Post: #1
ORNO Video Doorphone -> NICE MC424
Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp


Attached File(s)
.pdf  OR-VID-VP-2005,2006_PL_manual.pdf (Size: 11.01 MB / Downloads: 21)
Find all posts by this user
Quote this message in a reply
19-04-2017, 06:52 AM
Post: #2
RE: ORNO Video Doorphone -> NICE MC424
(18-04-2017 07:57 PM)askoba Wrote:  Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp

hi

nice control board has terminal 11-15 for step by step signal from external devices (buttons) . that terminal inputs its only for voltage free signal , before you do any conections make sure that the signal which comes out from 5-6 (video) is voltage free .If isnt thats no problem , you can use 12 vdc relay and send this signal by it .
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Installing Nice photo sensors MC424 polomint 2 1,457 06-08-2016 03:10 PM
Last Post: polomint
  Nice and mHouse Compatibility fni 0 726 13-07-2016 07:26 AM
Last Post: fni
  Nice photocells Oreillyb 1 1,380 02-06-2016 05:18 PM
Last Post: paulthegman
  Nice Mindy - One gate doesn't open Danseri 1 1,417 19-01-2016 11:00 AM
Last Post: Sav
  Use MC424 without photocell bullyx 1 2,179 02-08-2015 03:37 PM
Last Post: jaydev
  Nice Photocell replacement Nik 1 2,206 16-04-2015 02:59 PM
Last Post: Sav
  Daitem SC9200AU Controller to Nice MC824 Shropshire fella 2 3,071 27-10-2014 03:35 PM
Last Post: Sav
  NIce ME310 motors keep fusing Andre007 2 2,818 06-09-2014 02:12 PM
Last Post: Andre007
  Nice MORX keyfobs Roboregan 1 2,238 22-04-2014 12:08 PM
Last Post: Blakey111
  nice flo4r-s remote control question tibibond 2 4,112 04-03-2013 10:06 PM
Last Post: tibibond

Forum Jump: