Thread Rating:
  • 254 Vote(s) - 3.01 Average
  • 1
  • 2
  • 3
  • 4
  • 5
La412 RPM reversal error
#1
I have a liftmaster LA412 single arm gate opener. It is about 5 years old. Recently I got the #5 blink error code. When I use the learn limit mode the gate will open a few feet then stop. Re push the button and it moves a few more feet. The gate swings freely. With the motor dis-engaged it moves a little stiff but I don't think enough to be an issue. I lubed the pivot points, arm etc. I replaced the batteries and still get the RPM error. Any thoughts??
I am thinking I need to replace the arm (RPM sensor) but hate to spend the money if it is the control board.
Any advise would be appreciated.
Thanks
Kurt
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Liftmaster Professional CB24 / LYN400 24v - RPM Reversal Error jrhodes310 1 12,962 20-08-2012, 09:40 AM
Last Post: Mark
  RPM Reversal Diagnostic Error on Liftmaster LYN40024 2 18,015 16-05-2011, 05:59 PM
Last Post: Guest

Forum Jump:


Users browsing this thread: 1 Guest(s)