You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Thread Rating:
  • 66 Votes - 2.97 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
Intermitent Remote Control Cause/Repair
24-10-2016, 02:06 AM
Post: #1
Intermitent Remote Control Cause/Repair
We have both fobs and the built in car kind to control both an electric gate (Chamberlin Elitie 4000) and garage door. While the garage door opens on first push 95% of the time the darn gate "decides" when it wants to listen and half the time now won't work at all with cars or small fobs (and we have to resort to our one old and big clicker with the square 9 volt battery, and even then sometimes have to walk it outside and close to gate. Has worked fine for 10 yrs (though even then sometimes the car had to be quite close to motor for it to work--but it would work). Anyhow, it's getting worse and is big pain. All batteries replace in fobs to no effect. If it just didn't work at all I'd have a few clues, but it does work, just not well or consistently (and still sometimes it works perfectly with on press so...), so I'm stumped. Any help much appreciated.
Quote this message in a reply
Post Reply 

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Replacement garage door remote james_m_nutt 2 500 17-06-2017 03:25 PM
Last Post: james_m_nutt
Question Nice ON2 remote programming problem Annie 1 2,613 11-12-2012 12:34 PM
Last Post: Mark
Smile > Copy your old or broken remote controls with our CL400 copying remote! < easygates 0 3,499 20-04-2010 12:49 PM
Last Post: easygates

Forum Jump: