Thread Rating:
  • 270 Vote(s) - 2.84 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ZBK Master/Slave problem
#1
Hi, I have just installed a 2nd ZBK controller. I have followed the instructions and put all my controls on the Master and linked terminals 2 and Mtr2 on each controller. The slave gate does nothing but the Master works fine. I have set the correct dip switches for the gates. I would appreciate any help. Thanks (I am in New Zealand)
Reply
#2
(05-11-2014, 12:10 PM)Steve Jefferson Wrote: Hi, I have just installed a 2nd ZBK controller. I have followed the instructions and put all my controls on the Master and linked terminals 2 and Mtr2 on each controller. The slave gate does nothing but the Master works fine. I have set the correct dip switches for the gates. I would appreciate any help. Thanks (I am in New Zealand)

Thanks but I have got it sorted, I found a faulty limit switch on the original controller.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ZM3E underground loop problem GhostUK 4 1,331 20-03-2024, 10:46 AM
Last Post: benbrooks
  Radio Problem Distance to Antennae whelan100 1 19,306 02-01-2014, 04:11 PM
Last Post: Sav

Forum Jump:


Users browsing this thread: 1 Guest(s)