Thread Rating:
  • 232 Vote(s) - 2.83 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAAC 740 Need help!!!
#1
Hi guys,
My gate motor blown a fuse (5Amp -240V). After replacing the fuse. It only opens for about half second then stop straight away. Code 01 when opening and code 02 when stopping.
Did it blow more than just the fuse? Is there any expert around here who could provide me some help?
Thanks in advance.
DK
Reply
#2
Assuming it has the 740D control board, make sure that option EC of the advanced menu is set to 00 (don't forget to save changes).
Reply
#3
from what you are saying usually when a fuse blows something electrically has gone wrong, check the back of the panel for any white marks,

(02-02-2014, 10:10 AM)kvan64 Wrote: Hi guys,
My gate motor blown a fuse (5Amp -240V). After replacing the fuse. It only opens for about half second then stop straight away. Code 01 when opening and code 02 when stopping.
Did it blow more than just the fuse? Is there any expert around here who could provide me some help?
Thanks in advance.
DK
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 452 pcb board benner91 2 1,585 09-02-2024, 06:13 PM
Last Post: benner91
  Faac photocell stopped working Zeb Gulickx 2 843 28-01-2024, 12:56 PM
Last Post: Zeb Gulickx
  FAAC E124 fault 05 allan@amtas.com.au 0 700 14-10-2023, 12:37 PM
Last Post: allan@amtas.com.au
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,762 03-07-2023, 08:54 AM
Last Post: Michael
  7pcb452/455 FAAC Alpin 0 1,190 23-06-2023, 03:19 PM
Last Post: Alpin
  FAAC Photocells mmc1977 3 2,277 02-05-2023, 12:37 PM
Last Post: Matt Turner
  water damage to FAAC photocell Rajab 4 3,533 18-07-2022, 09:00 AM
Last Post: Michael
  455d FAAC FUSE IN CONTROL PANEL wildfig 0 2,068 04-10-2021, 02:34 PM
Last Post: wildfig
  FAAC foundation plate mun31 1 4,980 30-06-2021, 09:33 AM
Last Post: JamieF
  Faac 740 Mozil 3 16,248 13-06-2021, 07:51 AM
Last Post: david@venusawards.co.uk

Forum Jump:


Users browsing this thread: 1 Guest(s)