You are not logged in or registered. Please login or register to use the full functionality of this board...


Post Reply 
 
Thread Rating:
  • 138 Votes - 2.39 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
Dip switch Profil 100
22-09-2013, 11:26 AM
Post: #1
Dip switch Profil 100
Hi,

I have one of the original CDVI Profil 100 boxes.

My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?

Also it says:
(Do not use the latched output in 24V!)

Does this mean the power powering the relay, or 24V being switched going through the relay?

I would like to run the box on 24V and switch 12dc or 220ac with it NC.


Thanks for any replies!
Find all posts by this user
Quote this message in a reply
26-09-2013, 12:46 PM
Post: #2
RE: Dip switch Profil 100
I think I Spoke to you over the phone the other day. Did you manage to get this programmed up as discussed?
Kindest Regards,
Dave

(22-09-2013 11:26 AM)hwjr_easygates Wrote:  Hi,

I have one of the original CDVI Profil 100 boxes.

My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?

Also it says:
(Do not use the latched output in 24V!)

Does this mean the power powering the relay, or 24V being switched going through the relay?

I would like to run the box on 24V and switch 12dc or 220ac with it NC.


Thanks for any replies!
Visit this user's website Find all posts by this user
Quote this message in a reply
26-09-2013, 12:51 PM (This post was last modified: 05-12-2013 01:55 PM by josiah.)
Post: #3
RE: Dip switch Profil 100
Yes all is fine now! Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: