Thread Rating:
  • 471 Vote(s) - 2.69 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Slugs in the electric gate control panel again.
#1
Does anyone have a solution for keeping slugs out of the control panels for electric gates. I have been to a customers today and this is the second time in six weeks he has had an infestation of slugs in his control panel for the gates. The first time he was lucky the control panel cleaned up and the gates operated fine, however this time he has not been so lucky and requires a new panel. Which could be quite expensive if the panel is being replaced every two months.
Thank you in advance if you have a solution.
Reply
#2
seal up any access holes in control box with silicone sealant this will stop them
Reply
#3
Its not nice, but you could sprinkle a thin layer of salt on the enclosure base, they dont seem to like that..
Reply
#4
I would get a sealed box from Home depot and reinstall the componets in the new box.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Fried control board nickfr 3 277 22-03-2024, 12:53 PM
Last Post: JoeF
  Computer controlled control panel dsbhachu1 0 191 18-02-2024, 11:35 AM
Last Post: dsbhachu1
  Electric Gates with AllMatic BIOS2 Unit antsnaith 3 1,198 31-01-2024, 08:22 AM
Last Post: patronsecurity
  TC fault code on Q60ar control board Skydive1710 3 3,292 20-11-2023, 03:12 PM
Last Post: NormanY
  Holding the Gate Open mgb 1 3,465 11-07-2023, 01:35 PM
Last Post: JoeF
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,756 03-07-2023, 08:54 AM
Last Post: Michael
  BFT gate and Hikvision wiring help Gowrie 0 3,375 26-05-2023, 02:05 AM
Last Post: Gowrie
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 3,297 25-05-2023, 03:55 PM
Last Post: Kaala1
  Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help j1000 20 16,193 15-05-2023, 11:25 AM
Last Post: Nemen3242
  gate stop broke - any spares=liftmaster 300 bomitie 2 4,024 04-05-2023, 04:02 PM
Last Post: bomitie

Forum Jump:


Users browsing this thread: 1 Guest(s)