Thread Rating:
  • 407 Vote(s) - 2.87 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T291 Hydraulic Ram - What Oil
#1
We lost some oil from our T291 Hydraulic ram through the manual override (basically gate was pushed when the override key was used and the valve was loose - and a load of oil squirted out).

What is the recommended oil to replace this?

Thank you.
Reply
#2
Check the specification on the can if available - should meet a DIN or ISO spec.
If not available then ISO viscosity grade 15 - such as Tellus T 15 will work fine.

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)