Thread Rating:
  • 219 Vote(s) - 2.81 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gates open as soon as they close
#5
(04-01-2017, 12:47 PM)Sav Wrote: Excellent, I will take a look when I get home.

Craig

Hi Craig,

On the MC824H theres certain LEDS which give a diagnostic. The STOP LED must always be lit. The BlueBus LED should pulse once per second, if the gates get to the close position and then re open you need to check if either the BlueBus LED is not flashing twice per second or more, which would mean the gates are interrupting the front safety beams or if the Open LED lights up in which the gates have been given a further command.

You may also need to redo a learn of limits if anything has recently moved on the gates as this could be a force reversal. The gate detects an unknown force then reverses.

Let me know how you get on.
[/quote]


Yes the bluebus led is flashing twice per second. The stop LED is permanently lit.
Reply


Messages In This Thread
Gates open as soon as they close - by Craigp - 29-12-2016, 01:51 PM
RE: Gates open as soon as they close - by Craigp - 29-12-2016, 07:10 PM
RE: Gates open as soon as they close - by Sav - 04-01-2017, 12:47 PM
RE: Gates open as soon as they close - by Craigp - 08-01-2017, 05:04 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Gates out of sync Sws98 1 597 04-01-2024, 10:24 AM
Last Post: JoeF
  Nice photo sensor issue F210 and MC824H gates won’t operate Tantrum 1 1,524 04-01-2024, 10:06 AM
Last Post: Michael
  Nice MCA1 stuck open after stop command Khooke 1 2,330 25-09-2023, 10:47 AM
Last Post: Michael
  Nice Robus Don't Auto Close!!!! Ali_1982 1 4,301 03-08-2022, 02:23 PM
Last Post: Michael
  Auto close and hold open kensuth 1 4,339 14-03-2022, 11:49 AM
Last Post: JoeF
  Mc824h hold open Simonizzy 2 16,754 20-07-2020, 10:00 AM
Last Post: RyanB
  Mag-lock not activating after close benkay 0 3,337 17-02-2020, 11:39 AM
Last Post: benkay
  NIce Aria 400 unable to program gate open/close Telboy 2 11,264 13-01-2020, 03:33 PM
Last Post: Telboy
  Nice MC424L "hold open" feature bptra 3 66,624 10-07-2019, 10:38 AM
Last Post: JoeF
  MC424 - close automatically once open maaarek 3 23,567 03-12-2017, 10:35 AM
Last Post: Automatic-TC

Forum Jump:


Users browsing this thread: 2 Guest(s)