17-10-2016, 10:11 AM
Hi,
Were they previously working? If so it may be a receiver issue rather than a remote. The only way to re program the remotes into the system is to do the following.
1. Re program a master fob to the gate control panel. (Programming depends on the board)
2. Copy the other two remotes from the master. (Can be found in the video below)
http://manuals.easygates.co.uk/copy-came...ols-video/
Hope this helps.
Were they previously working? If so it may be a receiver issue rather than a remote. The only way to re program the remotes into the system is to do the following.
1. Re program a master fob to the gate control panel. (Programming depends on the board)
2. Copy the other two remotes from the master. (Can be found in the video below)
http://manuals.easygates.co.uk/copy-came...ols-video/
Hope this helps.