Thread Rating:
  • 301 Vote(s) - 2.81 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chamberlain motor lift 5000 remotes and keyless pad not opening door
#4
Hi Peter,

Glad to hear that!

If you do require any additional support, do not hesitate to contact me.

(15-05-2016, 08:36 PM)Peter Wrote:
(13-05-2016, 10:46 AM)Sav Wrote: Hi,

I have seen this before the receiver built into the logic board has failed which has stopped all radio transmission. If you put a cable between 1 & 2 the motor will still work. All radio transmission will not.

Does your remotes work on a 418mhz or 433mhz?

Thanks for the reply Sav but i've managed to reset it now as I noticed that the keyless pad numbers lit again so I tried the re- set procedure and now the remotes are also working too!

Thanks
Peter
Reply


Messages In This Thread
RE: Chamberlain motor lift 5000 remotes and keyless pad not opening door - by Sav - 17-05-2016, 09:39 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)