+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Nice Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=22)
+--- Thread: nice mca424 board or motor fault (/showthread.php?tid=6794)
nice mca424 board or motor fault - xjust - 13-02-2021
I have nice wingo kit with mca2 board and 920mm leafs model 3524.
After a power loss my swing gates dont fully close anymore.
The last leaf to close remains open at 70% of travel. I tried a reset / recalibration without success.
I have checked both motors (and wires) and they seem to have the same resistance and current draw while working.
Checked the gates without motors engaged and they are not blocked in any way.
Im thinkining board fault or maybe the motors have worn brushes ?
Anybody experienced this ? Even with sensitivity at level 5 they can be blocked with one finger while closing.
Level 6 (all leds off) is usable at the moment.
thanks