Electric Gates, Garage Door, Access Control, Smart Home & Security Forums
Gates out of sync - Printable Version

+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: Gates out of sync (/showthread.php?tid=5513)



Gates out of sync - frankjboyd - 07-01-2018

I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario


RE: Gates out of sync - Automatic-TC - 07-01-2018

(07-01-2018, 10:38 AM)frankjboyd Wrote: I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario

hi



that's happened probably because of cold weather .
can i know the control board type / name

is this za3 ??

regards


RE: Gates out of sync - Murphe5 - 31-12-2022

(07-01-2018, 03:25 PM)Automatic-TC Wrote:
(07-01-2018, 10:38 AM)frankjboyd Wrote: I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario

hi



that's happened probably because of cold weather .
can i know the control board type / name

is this za3 ??

regards



RE: Gates out of sync - Murphe5 - 31-12-2022

Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?


RE: Gates out of sync - Murphe5 - 03-01-2023

(31-12-2022, 01:31 PM)Murphe5 Wrote: Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?

Issue resolved, I switched the polarity on the new motor. Working good now.


RE: Gates out of sync - SamA - 05-01-2023

(03-01-2023, 04:14 PM)Murphe5 Wrote:
(31-12-2022, 01:31 PM)Murphe5 Wrote: Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?

Issue resolved, I switched the polarity on the new motor. Working good now.

Hi,

Great to hear Smile

Sam.